RGBlink
← 返回支持中心
proEvents

活动与广电专业支持

查看支持范围

如问题跨越现场活动、移动制作、广电运营或混合 proAV 与流媒体部署，请从这里开始。

  • 活动、广电、租赁与制作运营
  • 结合 proAV 处理器与流媒体设备的混合工作流
  • 适用于演出关键或时间敏感问题的快速分流

开始支持对话

告诉我们您的设备型号和问题，或选择一个示例问题。

支持知识

从左侧目录选择文章后，在此查看完整内容。

FAQ / TAO / TAO 1mini NDI Setup

TAO 1mini NDI encode and decode setup

Overview

If TAO 1mini is not encoding or decoding as expected, the issue is usually in mode selection rather than hardware failure.

Applies to

TAO 1mini

How to enable NDI encode

  • Press and hold the NDI encode icon to enter the settings screen.
  • Complete the required settings first.
  • Return to the main workflow and press the NDI encode icon again to start encoding.

How to enable NDI decode

  • Use the left and right arrows to switch to the NDI decode page.
  • Press and hold the NDI decode icon to scan for available NDI sources.
  • Swipe to select the required source.
  • Confirm the selected NDI source, channel name, and current IP information shown in the upper area of the interface.

If it still does not work

  • Re-check the network path used for source discovery.
  • Reconfirm that the selected page is decode mode rather than encode mode.
  • Test with a single known-good NDI source before adding more sources to the network.

Reference