FAQ / mini Series / Cannot Control PTZ
Cannot Control PTZ
Applies to:
mini+, mini-pro, mini-ISO, mini-edge, mini-mx
Symptom:
Unable to control connected PTZ camera
Action:
- mini device and camera(s) must be on the same network subnet. If, for example mini is 192.128.0.10, then cameras will need to be also in 192.168.0.X . Note many cameras come preset with an IP address that may be on another subnet. For ease, it is recommended that DHCP automatic IP addressing be used for mini and cameras.
- check the VISCA port number for the mini and camera are the same. By default mini devices VISCA port are defaulted port 1259