mini+ and mini-pro PTZ camera control checks

Applies to

mini+, mini-pro

Checks

• Confirm the PTZ camera supports the Sony VISCA protocol.
• Confirm the mini device and PTZ camera are on the same LAN.
• Confirm both devices can connect normally across the network.
• Set the PTZ camera IP address on the mini device to match the camera you want to control.
• On mini+, press the S key four times, then rotate the right knob to the IP setting option to access the PTZ camera IP address setting.

Duplicate source note

The source FAQ repeats similar mini+ PTZ wording on page 10. That duplicate has been merged here.