RGBlink
← 返回支持中心
proAV

系统集成与商业项目支持

查看支持范围

如问题涉及处理器控制、视频路由、安装设计、集成问题或 proAV 设备 OpenAPI，请从这里开始。

  • 商业安装、处理器、切换器、定标器和分发系统
  • proAV 设备 OpenAPI 控制问题
  • 已落地项目中的系统集成、部署和故障排查

开始支持对话

告诉我们您的设备型号和问题，或选择一个示例问题。

支持知识

从左侧目录选择文章后，在此查看完整内容。

FAQ / mini Series / Webcam Source Troubleshooting

Troubleshooting mini as a computer webcam source

Applies to

mini, mini+, mini-pro

Basic checks

  • Confirm the mini or mini+ is powered on.
  • Connect USB to a computer USB 3.0 port.
  • On Windows 8.1 or Windows 10, open Settings > Devices and confirm RGBlink USB3.0 capture appears as connected.

If Windows does not show the device correctly

  1. Unplug the USB cable.
  2. Wait 10 seconds.
  3. Reconnect the USB cable.
  4. Restart the computer.
  5. Open Device Manager > Cameras and confirm RGBlink USB3.0 capture appears.
  6. Open device properties and confirm the status says the device is working properly.
  7. If needed, use Update Driver and restart again.

Windows 7

Windows 7 does not include the required driver by default. Install the driver package or contact support if you need it.

macOS

If the camera is unavailable or not detected:

  1. Close any apps using the mini webcam source.
  2. Open Terminal.
  3. Run sudo killall VDCAssistant.
  4. If needed, run sudo killall AppleCameraAssistant.
  5. Reopen the application that uses the camera.
  6. If the issue remains, reboot the SMC using Apple's support guide: https://support.apple.com/en-us/HT201295