FAQ / TAO / TAO 1pro Signal Compatibility
TAO 1pro signal and audio compatibility checks
Overview
For issues with signal timing, acquistion and display, refer below
Applies to
TAO 1pro
Input-signal expectations
- TAO 1pro does not support interlaced camera signals.
- Supported HDMI input recognition is centered around 1080p50, 1080p60, and 720p workflows, with narrower tolerance for computer signals.
- The device does not provide EDID-based temporary input-resolution correction.
- Best practice is to prepare all inputs and outputs first, then power on the unit.
Display and output behavior
- During recording or streaming, the LCD preview may drop to roughly 10 to 15 fps even when the HDMI output remains at 60 Hz.
- If HDMI output to a 4K screen looks incomplete, reconnect all signals and displays in the intended final wiring state before startup.
Audio troubleshooting
- If the 3.5 mm audio output is delayed against video, match the audio sampling rate to the input signal in the input settings menu.
- If streamed audio sounds distorted, update to a recent firmware version and re-test with HDMI 2 as the input path if your workflow allows it.
- Reported bass-noise issues were reduced in later firmware.
Operational notes
- RTMP addresses remain fixed across reboots.
- Signal hot-backup is not supported.
- Bluetooth control support is limited to tested controller models.