Online Manual

mini-max User Manual

Export PDFRGBlink

4 Upgrade

🚨   Upgrade Notice

For devices with serial numbers 1–40 and firmware versions earlier than V2.39, upgrading to V2.39 or later may cause abnormal PVW/PGM output.

If this issue occurs, contact the RGBlink Technical Support team for further upgrade assistance.

To check the serial number: SETTINGS > Device Version.

mini-max supports online upgrade.

Before You Begin

  1. Connect mini-max to your computer using an Ethernet cable.

  1. Open the network settings on your computer and ensure that both the computer and the device are on the same local network. DHCP is recommended to allow automatic IP address assignment and ensure proper communication.

Steps

  1. Navigate to MENU > SETTINGS > Update
  2. If no update is available, the screen displays a message indicating that the current version is up to date.
  3. If a new version is available, the screen displays the new version number. Click Upgrade to download and install the update.

  1. The download typically takes approximately 10 minutes, depending on network conditions.
  2. Once the upgrade is complete, the device will restart automatically.
📢  Important

Do not disconnect power during the upgrade process. Doing so may cause the upgrade to fail.
  1. After the device restarts, return to the Update page to verify the updated firmware version.