RGBlink
← Back to Support Hub
proStream

Support For Individuals

What we can help with

Get assistance focussed on streaming switchers, UVC, IP and NDI streaming and more. Ask our AI Agent anything to start support session

  • Mini-series devices
  • TAO encoders
  • ASK wireless video

Start a support chat

Tell us your device model and what you need help with, or try a suggested question.

Support Knowledge

Select an article from the menu to view full content here.

FAQ / TAO / TAO 1pro Signal Compatibility

TAO 1pro signal and audio compatibility checks

TAO 1pro signal and audio compatibility checks

Overview

Many TAO 1pro complaints come from unsupported signal timing, unsupported hot-plug behavior, or audio settings that do not match the source.

Applies to

TAO 1pro

Input-signal expectations

  • TAO 1pro does not support interlaced camera signals.
  • Supported HDMI input recognition is centered around 1080p50, 1080p60, and 720p workflows, with narrower tolerance for computer signals.
  • The device does not provide EDID-based temporary input-resolution correction.
  • Best practice is to prepare all inputs and outputs first, then power on the unit.

Display and output behavior

  • During recording or streaming, the LCD preview may drop to roughly 10 to 15 fps even when the HDMI output remains at 60 Hz.
  • If HDMI output to a 4K screen looks incomplete, reconnect all signals and displays in the intended final wiring state before startup.

Audio troubleshooting

  • If the 3.5 mm audio output is delayed against video, match the audio sampling rate to the input signal in the input settings menu.
  • If streamed audio sounds distorted, update to a recent firmware version and re-test with HDMI 2 as the input path if your workflow allows it.
  • Reported bass-noise issues were reduced in later firmware.

Operational notes

  • RTMP addresses remain fixed across reboots.
  • Signal hot-backup is not supported.
  • Bluetooth control support is limited to tested controller models.

Reference