Accessing the Web Management Interface

The web management interface for TAO 1tiny 2 v2 can be accessed using the device's IP address. The default static IP address is 192.168.5.100.

1. Power on TAO 1tiny 2 and connect its HDMI output to a monitor using an HDMI cable. The device's default IP address should appear on the monitor.
2. Disconnect the computer from its current network and assign it a static IP address in the same subnet as TAO 1tiny 2, such as 192.168.5.x, where x is any value from 2 to 254.
3. Open a web browser and enter the device's IP address to access the web management interface.
4. Log in using the default credentials:
   • Username: admin
   • Password: admin

For security, change the default password under Options after the first login.

Network Configuration

DHCP (automatic IP address assignment) is disabled by default on TAO 1tiny 2.

After logging in using the default static IP address for the first time, go to Options > LAN and enable DHCP to allow the device to obtain an IP address from the router and connect to the network.

Choose one of the following connection methods:

Method 1: Connect via a router

1. Connect TAO 1tiny 2 to the router using an Ethernet cable.
2. Connect the computer to the same router via Wi-Fi.

Once both devices are connected to the same network, no further network configuration is required.

Method 2: Connect via a switch

1. Connect the router to the switch using an Ethernet cable.
2. Connect both TAO 1tiny 2 and the computer to the switch using Ethernet cables.

Once both devices are connected to the same network, no further network configuration is required.