Online Manual

mini-pro v3 User Manual

Export PDFRGBlink

3.9 PTZ

mini-pro supports PTZ camera control through the IP VISCA protocol, including:

  • Pan and tilt control (X/Y axis)
  • Lens zoom control
  • Manual and auto focus
  • PTZ preset recall

mini-pro also supports saving PTZ camera position and zoom status for quick recall later.

PTZ scenes on mini-pro save both PTZ parameters and the corresponding input source. When a PTZ scene is recalled, the system automatically switches to the associated camera input.

mini-pro v3 currently supports PTZ cameras using the VISCA protocol.

Open the PTZ Control Menu

  1. Press the M button to return to the main menu.
  2. Tap PTZ to enter the PTZ control page.

Select a PTZ Camera

  • Press 1, 2, 3, or 4 to select the corresponding input source.
  • Tap - or + next to the camera icon to switch between different video sources.

The selected camera becomes the active PTZ camera for control.

Camera Port Settings

Before controlling the camera with mini-pro, ensure the camera port number is set to 1259.

If the camera port is not 1259:

  • Refer to the camera user manual
  • Enter the correct port number on the PTZ settings page

This ensures proper PTZ communication.

We recommend using the RGBlink vue series PTZ cameras.

Network Requirements

mini-pro and the PTZ camera must be on the same subnet.

The first three segments of the following IP addresses must match:

  • mini-pro IP address
  • PTZ camera IP address

The mini-pro IP address can be modified in:

  • PTZ menu
  • SETTINGS > IP Setting

When modifying the IP address, use the X/Y knobs on the front panel to select and adjust each IP address segment.

PTZ Preset Control

Adjust Position / Zoom / Focus

After PTZ is enabled:

  • Tap the directional icons in the location section to adjust the PTZ position.
  • Tap the up and down icons in the focus section for manual focus.
  • Tap A icon to enable auto focus.
  • Tap the up and down icons in the zoom section to adjust the zoom level manually.
Adjust PTZ Speed
  1. In the Speed section, tap + or − to adjust the PTZ movement speed.
  2. Supported speed levels: 17, 14, 11, 8, 5, 2
Reset PTZ Settings

Tap the reset icon on the screen to restore PTZ parameters to default settings.