RGBlink
← Back to Support Hub
proAV

Support For Integrators & Commercial Installations

What we can help with

processor control, video routing, installation design, integration issues, and OpenAPI questions for proAV devices.

  • Commercial installations, processors, switchers, scalers, and distribution systems
  • OpenAPI control questions for proAV devices
  • System integration, deployment, and troubleshooting across installed projects

Start a support chat

Tell us your device model and what you need help with, or try a suggested question.

Support Knowledge

Select an article from the menu to view full content here.

FAQ / TAO / TAO 1mini NDI Setup

TAO 1mini NDI encode and decode setup

Overview

If TAO 1mini is not encoding or decoding as expected, the issue is usually in mode selection rather than hardware failure.

Applies to

TAO 1mini

How to enable NDI encode

  • Press and hold the NDI encode icon to enter the settings screen.
  • Complete the required settings first.
  • Return to the main workflow and press the NDI encode icon again to start encoding.

How to enable NDI decode

  • Use the left and right arrows to switch to the NDI decode page.
  • Press and hold the NDI decode icon to scan for available NDI sources.
  • Swipe to select the required source.
  • Confirm the selected NDI source, channel name, and current IP information shown in the upper area of the interface.

If it still does not work

  • Re-check the network path used for source discovery.
  • Reconfirm that the selected page is decode mode rather than encode mode.
  • Test with a single known-good NDI source before adding more sources to the network.

Reference