RGBlink
← Back to Support Hub
proAV

Support For Integrators & Commercial Installations

What we can help with

processor control, video routing, installation design, integration issues, and OpenAPI questions for proAV devices.

  • Commercial installations, processors, switchers, scalers, and distribution systems
  • OpenAPI control questions for proAV devices
  • System integration, deployment, and troubleshooting across installed projects

Start a support chat

Tell us your device model and what you need help with, or try a suggested question.

Support Knowledge

Select an article from the menu to view full content here.

General / D8/D8 PLUS / D8 PLUS Input and Signal Switch

D8 PLUS Input Channels and Signal Switching

D8 PLUS supports two input channels: DP 1.4 and HDMI. Both input sources can be connected simultaneously, allowing users to switch between them without reconnecting cables.

Input switching is manual. The device does not automatically detect and switch to an active input source. To switch signals, go to Menu > Input and select the required input source.

D8 PLUS DP 1.4 Input Note

When using a DP 1.4 signal on the D8 Plus, manually select DP 1.4 under Menu > Input. Selecting the correct input is required for stable system operation and proper EDID configuration.

An incorrect input selection may cause system instability or prevent EDID configuration from working properly.

D8 PLUS Key Facts

  • Input channels: 2 (DP 1.4 and HDMI).
  • Simultaneous connection: Supported.
  • Signal switching: Manual.
  • Cable reconnection: Not required when switching between connected DP and HDMI sources.
  • DP 1.4: Requires manual selection under Input.