In addition to upgrading via USB storage devices, mini-edge SDI also supports online upgrade.

Before You Begin

1. Connect mini-edge SDI to your computer using an Ethernet cable.

2. Open the network settings on your computer and ensure that both the computer and the device are on the same local network. DHCP is recommended to allow automatic IP address assignment and ensure proper communication.

Steps

1. Press ENTER and navigate to SETTING > About > Model Version to open the upgrade page.
2. Select Check for Updates and press ENTER.

• If no update is available, the system will display a message indicating that the device is already running the latest version.

3. If a new version is available, the update notification will be displayed automatically.

4. Select New Version Available and press ENTER to view the available firmware version.

Then select Download and Update and press ENTER to start downloading the update package.

5. During the download process, the download progress will be displayed.

The download typically takes approximately 10 minutes, depending on network conditions.

6. After the download is complete, select Confirm and press ENTER to begin the upgrade.

7. The upgrade progress bar will be displayed during installation.

Once the upgrade is complete, the device will restart automatically.

📢  Important

Do not disconnect power during the upgrade process. Doing so may cause the upgrade to fail.

8. After the device restarts, return to the Model Version page to verify the updated firmware version.